LOPPER VESCO T20

Lopper Vesco T20
T20_60.jpgT20_60.jpg
Description

This branch-cutter is suitable for pruning branches of large diameterthanks to the considerable blade opening and the special lever systemin order to diminish the cutting effort. It is an anvil branch-cutterwhere the mobile blade - after the cut has been completed - “goesagainst” a forged aluminium anvil, performing a clear and clean cut (the so called guillotine cut ). The mobile blade is mounted in aneccentric position: this allows the brunch to be dragged towards thefulcrum avoiding possible slipping. The light weight and the thin shapemake the branch-cutter very easy to handle; it can also be used wherethe vegetation is thicker and more distant. The blade unit is made ofsteel with a high carbon content and it is hot forged and tempered withheat treatment ( 58 HRC ). An inside grease container lubricates thetool constantly. The handles are made of alloy aluminium with an antislipping plastic grip.

{tab=Spesifications}



:

T20/80

T20/60

T20/100
: 23,6 in 31,5 in 39,4 in
: 30 oz 35 oz 40 oz
: 1,8 in 1,8 in 1,8 in

 

 

 

 

 

 

{tab=Recommended for}



:

:
:  
:  
:
:
:

:
:

:
:
:

 

 

 

 

 

LOPPER VESCO T20/80 This branch-cutter is suitable for pruning branches of large diameterthanks to the considerable blade opening and the special lever systemin order to diminish the cutting effort. It is an anvil branch-cutterwhere the mobile blade - after the cut has been completed - “goesagainst” a forged aluminium anvil, performing a clear and clean cut (the so called guillotine cut ). The mobile blade is mounted in aneccentric position: this allows the brunch to be dragged towards thefulcrum avoiding possible slipping. The light weight and the thin shapemake the branch-cutter very easy to handle; it can also be used wherethe vegetation is thicker and more distant. The blade unit is made ofsteel with a high carbon content and it is hot forged and tempered withheat treatment ( 58 HRC ). An inside grease container lubricates thetool constantly. The handles are made of alloy aluminium with an antislipping plastic grip. LOPPER VESCO T20/100 This branch-cutter is suitable for pruning branches of large diameterthanks to the considerable blade opening and the special lever systemin order to diminish the cutting effort. It is an anvil branch-cutterwhere the mobile blade - after the cut has been completed - “goesagainst” a forged aluminium anvil, performing a clear and clean cut (the so called guillotine cut ). The mobile blade is mounted in aneccentric position: this allows the brunch to be dragged towards thefulcrum avoiding possible slipping. The light weight and the thin shapemake the branch-cutter very easy to handle; it can also be used wherethe vegetation is thicker and more distant. The blade unit is made ofsteel with a high carbon content and it is hot forged and tempered withheat treatment ( 58 HRC ). An inside grease container lubricates thetool constantly. The handles are made of alloy aluminium with an antislipping plastic grip.

 

 

 

 

 

 

 

 

 

 

{tab=Maintenance}

1. Clean all the tool parts accurately after the branch-cutter are used

2. Lubricate the rotating parts once a week (fig. 1)


3. Check and adjust the blade and counter-blade play. If it is necessary

a. Lock a n° 19 tube wrench in a vice

b. Fit the central screw hexagonal head into the tube wrench and tighten slightly

c. Use a n° 17 wrench to tighten the central nut

d. Turn the n° 17 wrench and branch-cutter simultaneously ( the same way as the arrow ) until the blades are able to rotate






4. . Check all the tightening of all the screws once a week

5. Sharpen the mobile blade when it does not cut properly using VESCO stones F4 and F3 (fig. 3 )

6. When the branch cutter is not used for long periods, protect the steel surfaces with a light film of oil.

{tab=Spare parts}

{tab=Downloads}